![]() ![]() Special bolt holes are created as defined on the Bolts tab regardless of the gusset plate position. Gusset+ T: Previously, the creation of special bolt holes depended on whether the gusset plate had been set to be above or below the T profile. Gusset+ T: Previously, the connection was not always created in situations where the secondary part had a fitting at the opposite end. Welded to top flange S (149), Full depth S (185), Column with stiffeners (186), Column with stiffeners (188): Previously, notch sizes were not correctly rounded when the secondary part was sloped. The welds are also created to the main part flanges.įull depth (184): Previously, the horizontal bolt edge distance was not applied correctly. This issue has now been fixed.īolted gusset (11), Tube gusset (20), Gusseted cross (62), Bolted gusset (196): Previously, the welds between the stiffeners and the main part were only created to the main part web. Haunch (40): Previously, weld number 4 was created in an incorrect position in some cases. This issue has now been fixed.Įmbedded anchors (008): On the Picture tab, you can now select Half sphere as the shape of the cutout around the anchors.Īutomated reinforcement layout - double tee beam (51): The leg length of stem stirrups is now set correctly as defined in the component dialog box. This issue has now been fixed.Ĭoncrete console (110): Previously, the neoprene connection sometimes connected the wrong parts. This caused connections with other components to break. Reinforced concrete stairs (95): Previously, in some situations, stair part IDs could change when modifying the component. Previously, the maximum number of characters was 20. This issue has now been fixed.Ĭoncrete console (110): The Name property of Dowel defined on the Socket tab can now have a maximum of 62 characters. Braced girder (88): On the Parts tab, you can now specify the axis direction for the Model work plane position: Model XY, Model YZ, or Model ZX.Ĭoncrete console (110): When the anchor was created as a reinforcing bar, the option to add it to the beam did not work, the anchor was always added to the column. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |